Carboncore Cortex build up 5

Carboncore Cortex build up 5

Today i finished the Cortex!   programmed the A2 as X8 but swapped 2 with 6 and 4 with 8 so its a real X8 not the DJI version The Cortex weight is about 3,4 kg without Lipo. now its ready for the maiden flight!      

Mehr

Carboncore Cortex build up 4

Carboncore Cortex build up 4

After weeks of waiting for the A2 finally it arrived. so I mounted it and soldered the last cables!             DJI A2 Now thats a big GPS sooo many cables Mounted the A2 IMU, FC and PMU All cables soldered and secured with plasti dip finished

Mehr

Carboncore Cortex build up 3

Carboncore Cortex build up 3

After two weeks of waiting for a „braid hose“ to cover the motor cable in the carbon arms with, now part 3 At first I tested all motors and checked if all of them are balanced. The next step was to shorten all motorcables so I don’t have a clutter. After soldering all plugs to the shorter motorcables, I put all cables into the „braid hose“.         Motor ready for...

Mehr

Carboncore Cortex build up 2

today I have nearly everything soldered. There is enough space for all Esc’s and its easy to solder all cables to an power distribution board. For safety I have sealed the soldering points with plastidip. If i’m finished with all soldering the whole board will be sealed with plastidip.   All ESCs soldered bottom view Cortex unfolded

Mehr

Carboncore Cortex build up 1

Carboncore Cortex build up 1

In the next weeks I will build up my new Carboncore Cortex X8 and post a small blog here. It will be equipped with the DJI A2 8x T-Motor MN 4014/11 330kV 8x 40A Maytech OPTO ESC 8x 15×5 Fiala Propellers 6S8000-10000mAh Lipo an Alexmos 3 axis brushless gimbal and 5.8 GHz video downlink   The Cortex is the newest multirotor copter from Carboncore. For more information visit http://shop.carboncore.co.uk/Cortex   I love the design...

Mehr